 
MK2660 Program control fixed-beam planner grinder
Features:
1. With a fixed beam gantry structure and a solid rigidity, the machine tool is suitable for a fine machining of the middle and large
parts and moulds. Its hydraulic system, super grinding head and control system are all made in Taiwan.
2. The horizontal beam is designed to be in an inclined type, good in mechanics.
3. The bench (X axis) is moved longitudinally by a single cylinder and controlled by a remote ratio flow valve of continuous
change. A hydraulic control station, with an oil cooler, is made in Taiwan.
4. The grinding head is equipped with a super fine rolling bearing, all of which are made in Taiwan.
5. The grinding head can move vertically and horizontally because of a servo mechanism to realize the automatic grinding and
micro feeding of the electronic hand wheel.
6. It has an automatic lubricating system with an automatic alarm to make sure a good lubrication for the lubrication of the rails.
| Specification |
MK2660 |
| Bench area |
6000×2400mm |
| Max. stroke |
6200×2600mm |
| Distance from main shaft center to bench surface (horizontal axis) |
200～1000mm |
| Distance from main shaft center to bench surface (vertical axis) |
0～650mm |
| Max. load of bench |
10000kg |
| Motor power of horizontal grinding head |
11kw |
| Motor power of vertical grinding head |
7.5kw |
| Longitudinal travel speed of bench |
1～22m/min |
| Horizontal travel speed of grinding head |
20～1200mm/min |
| Vertical travel speed of grinding head |
20～400mm/min |
| Vertical and horizontal feeding of a hand wheel per mark |
0.005mm |
| Motor power of hydraulic tank |
18.5kw |
| Power of horizontal feeding motor |
2kw |
| Power of vertical feeding motor |
3kw |
| Grinding disc of horizontal grinding head |
500x75x203mm |
| Grinding disc of vertical grinding head |
400x60x127mm |
|
